Customers Want Larger Diameter Drill Bushings

We listen to our customers. A number have requested larger diameters to compliment the 27 Piece OD Drill Bushing Set (Transfer Bushings) where this popular set leaves off.

As a result, we manufacture and assemble this set of Larger Diameter Drill Bushings (Transfer Bushings) with diameters starting at 0.5625″ (9/16″) to 0.7600″. These were the five most requested sizes. To round out the set we have added a 0.7850″. Intended for a specific application, to precisely locate the fastener holes when installing Brownline cargo/seat track extrusions. The Internal Diameter of the bore is 0.1285″. This is to accommodate a standard #30 Drill.

We also manufacture a similar Cargo/Seat Track bushing, P/N 9536829-7850, with a 0.500″ internal bore to accept our standard Slip Fit Drill Bushings. An added feature  includes a drilled and tapped set screw hole in the side of the bushing. This set screw retains the Slip Fit bushing in the Cargo/Seat Track bushing during use.

Machined to the Same High Standard

Special Air Services-Canada manufactures and supplies this set of Larger Diameter Drill Bushings to the same high standard as all our drill bushings .

Each bushing is:

• machined from O-1 Oil Hardening Tool Steel.
• Then heat treated and tempered to RHC 58+ . This ensure adequate hardness to resist wear over years of use.

Each Tray is:

• machined from 6061-T6 aluminum.
• anodized a red color
  • to resist scratching and corrosion.
  • Also, results in a highly visible tool in and around the work area.
• engraved to show the bushing diameters adjacent to the respective hole location.
• lastly, rubber feed installed to improve stability and handling.
• Each set is Serialized to assist in a Tool Control System should one be in place.